- 10” x 8” x 6” NEMA4X, weather tight Fiberglass Enclosure
- 26A Max, 120V for use with up to 6 heaters (208-240V also available)
- 2 x electronic temperature controllers (process and hi-limit)
- Includes 2 x Type J thermocouples
- ETL approved for use in USA and Canada
- Completely pre-wired for simple, terminal block heater and incoming power connection
- Use 2SPCP-MP mounting pad for a quick tank mounted installation
- Includes 3 x heater cordgrips & hole seals
-
-
2SPCP controller mounting pad for installation of 1 x 2SPCP controller to a tank surface
- Adhesive backed for extremely quick installation
- Includes all necessary hardware
- Eliminate the requirement for custom controller bracket fabrication or straps around your tank
- 14” x 24” pad size
- Use 2SPCP-MP mounting pad for a quick tank mounted installation
- For horizontal tank installations contact HTD for special hardware configuration
-
The 2XTC Tank Heating Controller is the most complete and versatile tank heating controller in existence. Use this product to accurately control SPX and EGLX tank heating pads as well as WinterSafe Self-Regulating Heating Cable.
- Process temperature control with hi-limit protection
- 4-20mA retransmission output
- 100-277 VAC, 50/60 HZ, 30A
- Alarm contact for communication with customer systems (NO or NC, selectable)
- High temperature, low temperature, and low current alarms
- Simple operation and customizable presets
- Use with up to 6 heaters
- Compact, lightweight design
- Push on heater connections for a quick installation
- NEMA4X, IP65 Polycarbonate enclosure
- Includes 2 x RTDs and 6 x heater cordgrips/hole seals
- ETL approved for use in the USA and Canada
-
2XTC controller mounting pad for installation of 1 x 2XTC controller to a tank surface
- Adhesive backed for extremely quick installation
- Includes all necessary hardware
- Eliminate the requirement for custom controller bracket fabrication or straps around your tank
- 14” x 24” pad size
- 2SPCP shown in images. This product to be used with 2XTC controller only
- For horizontal tank installations contact HTD for special hardware configuration
-
Industrial-grade, line sensing (pipe sensing) thermostat ideal for freeze protection and process temperature maintenance applications.
- NEMA4X, die cast Aluminum, weatherproof enclosure
- Stainless Steel Sensor, 10’ capillary
- 15F-140F adjustable range
- One SPDT, snap-action switch
- 22A, 480V max
- UL/cUL approved for ordinary areas throughout the USA and Canada
-
- Waterproof, Epoxy-glass construction. Highly Flexible. (not designed for submersed applications)
- Low-watt density for safe operation on FRP and metal tanks
- FM approved for ordinary and hazardous areas throughout the USA and Canada
- Installed with banding or wound directly onto FRP tanks
- 120V and 240V versions (240V heaters may be used on 480V in series pairs)
- EGLX500 - 18 x 48”, 500 Watts
- EGLX400 - 18” x 60”, 400 Watts (ideal for higher maintain temperatures on FRP tanks)
- 20’ Braided/grounded cold lead, no conduit required when installed under insulation
- See data sheet for application recommendations
- Use with 2XTC or 2SPCP tank heating controllers
-
Industrial-grade, under-insulation, self-regulating heating cable end termination kit
- NEMA4X, rugged, water-tight polycarbonate construction
- CSA approved for ordinary and hazardous areas throughout the USA and Canada
- Easy to use, no special tools required
-
Industrial-grade, above-insulation, self-regulating heating cable end termination kit with indicating light.- NEMA4X, rugged, water-tight fiberglass construction
- CSA approved for ordinary and hazardous areas throughout the USA and Canada
- Easy to use, no special tools required
- 85-277 VAC
- Provides simple, visual confirmation of voltage at the end of your heating cable
-
Aluminum tape to seal edges of SPX and EGLX heaters to tank surface, keeping debris, moisture and insulation from migrating between the heaters and tank surface prior to and during the insulation process. Also used on non-metallic pipe heat tracing applications to transfer and evenly distribute heat.
- 3” wide x 150’
- Release liner
-
-
Installed on exterior of thermal insulation to indicate heat traced pipes
- Adhesive backed, high visibility
- UV and weather resistant
- Use one label per 20’ pipe per NEC article 427-13 requirement
-
Adhesive backed fiberglass tape used on pipe heat tracing applications to attach self-regulating heating cable to the pipe
- Strong fiberglass construction, adhesive backed
- 350F service temperature
- ½” wide, 180’ per roll
-
Commercial grade, ambient sensing thermostat ideal for freeze protection on smaller circuits. Economic, simple and reliable. Terminate heating cable directly into this thermostat using our RG-PK termination kit
- NEMA4X weatherproof, polycarbonate enclosure
- 40F-110F adjustable
- One SPDT, Snap-action switch
- 16A, 277V max
- UL and CSA approved for ordinary areas
-
Industrial-grade, self-regulating heating cable termination kit that supplies everything required for one pipe mounted power connection.
- NEMA4X, rugged, water-tight fiberglass enclosure and pipe mounting stub
- CSA approved for ordinary and hazardous areas throughout the USA and Canada
- Easy to use with convenient terminal block connections, no special tools required
- Can also be used as high profile splice or end seal
- Can be used with 1 or 2 heating cable lengths
- Pipe straps/clamps not included
-
Use these clips to properly install WinterSafe RG Heating Cables to asphalt or standing seam roofs.- CSA approved for use throughout the United States and Canada
- Simple to use, no special tools required
- Available in packs of 10 pcs (RG-C-10) or 50pcs (RG-C-50)
-
Self-regulating heating cable end termination kit
- UV and weatherproof
- CSA approved for ordinary areas throughout the USA and Canada
- Includes everything required for TWO (2) self-regulating heating cable end seals
-
Use these brackets to safely direct WinterSafe RG Heating Cables in and out of gutters, over sharp corners and along gutter bottoms.- CSA approved for use throughout the United States and Canada
- Simple to use, no special tools required
-
- UV and weatherproof
- Molded three prong plug
- CSA approved for ordinary areas throughout the USA and Canada
- Provides ground fault circuit protection
- Includes everything required for one self-regulating heating cable GFCI power connection kit and end seal
- 15A max circuit, 120V
-
Self-regulating heating cable power termination kit that supplies everything required for one power connection and one end seal. Use the RG-PK to terminate WinterSafe RG Heating cables.
- UV and weatherproof
- Includes pipe mount bracket
- CSA approved for ordinary areas throughout the USA and Canada
- Includes everything required for one self-regulating heating cable power connection and one end seal
- Use with CSA approved junction box (not included)
-
Self-regulating heating cable splice/tee kit
- UV and weatherpoof
- CSA approved for ordinary areas throughout the USA and Canada
- Includes everything required for one self-regulating heating cable splice OR tee connection and one end seal
-
Industrial-grade, self-regulating heating cable splice kit
- NEMA4X, rugged, water-tight polycarbonate construction
- CSA approved for ordinary and hazardous areas throughout the USA and Canada
- Easy to use, no special tools required
-
- Waterproof, Epoxy-glass construction. Highly Flexible. (not designed for submersed applications)
- Ultra-low watt density for safe operation on polyethylene, polypropylene and FRP tanks
- FM/cFM approved for ordinary and hazardous areas throughout the USA and Canada
- Peel-and-stick, industrial grade adhesive backing for extremely simple installation
- 120V, 420 Watts, 18” x 60”
- 16’ braided/grounded cold lead, no conduit required when installed under insulation
- Integral hi-limit cutout
- Use with 2XTC or 2SPCP tank heating controllers
-
- Waterproof, Epoxy-glass construction. Highly Flexible. (not designed for submersed applications)
- Low-watt density for safe operation on FRP and metal tanks
- FM/cFM approved for ordinary and hazardous areas throughout the USA and Canada
- Peel-and-stick, industrial grade adhesive backing for extremely simple installation
- 120 or 240V, 640 Watts, 18” x 60”
- 20’ Braided/grounded cold lead, no conduit required when installed under insulation
- Custom cold lead lengths available
- Use with 2XTC or 2SPCP tank heating controllers
-
- Waterproof, Epoxy-glass construction. Highly Flexible. (not designed for submersed applications)
- Ultra-low watt density for safe operation on polyethylene, polypropylene and FRP tanks
- FM/cFM approved for ordinary and hazardous areas throughout the USA and Canada
- Peel-and-stick, industrial grade adhesive backing for extremely simple installation
- 120V, 210 Watts, 18” x 30”
- 10’ braided/grounded cold lead, no conduit required when installed under insulation
- Integral hi-limit cutout
- Use with 2XTC or 2SPCP tank heating controllers
-
Industrial-grade, self-regulating heating cable splice kit
- NEMA4X, rugged, water-tight polycarbonate construction
- CSA approved for ordinary and hazardous areas throughout the USA and Canada
- Easy to use, no special tools required
- Each TK Tee Connection Kit creates the requirement for an additional EK or ELK end seal kit
-
Commercial Grade, line sensing (pipe sensing) or ambient sensing thermostat for freeze protection on circuits up to 20A.
- NEMA4X, IP65 Polycarbonate enclosure
- 3’ bulb and capillary
- 40F fixed setpoint
- One SPDT, snap-action switch
- 22A, 480V max
- UL & CSA approved for ordinary areas
-
Industrial grade, line sensing (pipe sensing) thermostat ideal for freeze protection and process temperature maintenance applications in classified/hazardous areas
- NEMA 4/7/9 die cast Aluminum enclosure
- Stainless Steel Sensor, 10’ Capillary
- 25F-325F adjustable range
- One SPDT, snap-action switch
- 22A, 480V max
- FM, UL, CSA Approved for:
Class I, Div. 1 and Div. 2 groups B,C,D
Class II, Div. 1 and Div. 2 groups E, F G
Class III
-
WinterSafe is an industrial grade, self-regulating pipe heat tracing cable designed for use on applications ranging from freeze protection to process maintenance up to 150°F (65°C). The self-regulating characteristics of WinterSafe ensure safety, reliability and efficiency. WinterSafe self-regulating heating cable will not overheat or burnout even when overlapped upon itself. Installation is quick, simple and requires no special tools, knowledge or skills.- Automatically varies output in response to pipe temperature
- Thermoplastic or FEP outer-jacket options
- Weatherproof/UV rated
- 3, 5, 8 or 10 W/ft, 120V or 208-277V
- Simple to install with HTD accessories
- 5 year product warranty
Quantity Discounts (discounts will be shown in your cart)
Quantity
CT
CR
0 - 99 $5.95 $4.95 100 - 499 $5.35 $4.45 500 - 999 $4.80 $4.00 1000+ $4.35 $3.65 -
WinterSafe-RG Roof & Gutter De-icing heating cables can be used to prevent ice dams on standard asphalt shingle and standing seam roofs. This product line is extremely safe when installed properly with HTD Heat Trace connection and installation kits. Bring industrial grade to your residential or commercial properties.
- Thermoplastic or FEP outer-jacket options
- Weatherproof/UV rated
- 5W/ft or 8 W/ft, 120V or 208-277V
- 5 year product warranty
- CSA approved for use throughout the United States and Canada
Quantity Discounts (discounts will be shown in your cart)
Quantity
CT
CR
0 - 99 $3.95 $2.95 100 - 499 $3.55 $2.65 500 - 999 $3.20 $2.40 1000+ $2.90 $2.15
